Scrap Shear Machine
Scrap Shear Machine

Scrap Shear Machine

INTRODUCTION

The house of “ARS BRAND RECYCLING MACHINES” proudly introduces “HORIZONTAL SCRAP SHEAR” IN INDIA to solve all scrap
processing problems of a Melting Furnace with a single machine without any labor only one operator. OPERATION of ARS Brand Horizontal
Scrap Shear 400 On the Scrap Shear the PLC interface should show Home Position, in this position Push the Auto cycle Button and start
charging the Mixed Scrap consisting of Commercial, HMS 2, HMS 1 can be put without any sorting by a Grab/Magnet into the Hopper of the
Horizontal Shear, on a continuous basis, within minutes you will see the scrap sheared in size of 16” coming out of the front end of the Shear.
In the shearing the process the charged scrap is pre-compressed first hydraulically than sheared in the process the scrap gains density and the cut size of 16”length These 16” long pieces are perfectly fit to be at first charged in the Furnace

 

Horizontal Shearing

TYPES OF SCRAP ARS BRAND HORIZONTAL SHEAR CAN PROCESS

• HMS 2 • PIPES & STRUCTURES • SHEET AND PLATES • MIXED SCRAP

SALIENT FEATURES ONLY FOR HSS SERIES

Heavy Duty Fabricated Structure with replaceable Hardox Liners on all the inside and wear areas
 Hydraulic Cylinders are specially designed for this tough application
Pre-Compresses the medium and light scraps and increases their density before shearing then it shears
constantly by automatic shearing with the stable cut length.
 Capacity is between 5 and 10 ton /hour depending on various ARS series from 400 to 600.

 

MODEL                                                 ARS-HCS400                                       ARS-HSS400                                       ARS-HSS600

SHEAR CYLINDER                                200 TON X 2                                            200 TON X 2                                         300 TON X 2 (1200 MM)
NOMINAL FORCE

PRESS CYLINDER                                 120 TON                                                      120 TON                                                  190 TON (1200MM )
NOMINAL FORCE

CHAMBER SIZE                       3400 LX 2500W X3200H (mm)            3400 LX 2500W X3200H (mm)              3750 LX 2500W X3200H (mm)

FEEDING SIZE                        2200 L X 1400W X2250H (mm)            2200 L X 1400W X2250H (mm)              2550 L X 1400W X2250H (mm)

ELECTRIC MOTOR                               60 H.P X2                                                  75 H.P X2                                                          100 H.P X2

COOLING SYSTEM                    WATER-COOLED HEAT                            WATER-COOLED HEAT                HEAT EXCHANGER BANK (4nos.)
EXCHANGER X 3                                     EXCHANGER X 3

OPERATION                                   PLC CONTROLLED                                     PLC CONTROLLED                                         PLC CONTROLLED

FINAL MATERIAL SIZE                  4-7MM IN HEIGHT                              400MM IN LENGTH                                     400MM IN LENGTH

CAPACITY                                        7 TONS APPROX PER HOUR            4-7 TONS APPROX PER HOUR                  6-10 TONS PER HOUR
DEPENDING ON THE DENSITY            DEPENDING ON THE DENSITY         DEPENDING ON THE DENSITY
OF THE IN-FEED MATERIAL               OF THE IN-FEED MATERIAL                  OF THE IN-FEED MATERIAL